Feed Machine

What is a twin screw floating fish food machine?

The twin-screw floating fish food machine has two pairs of screws that mesh with each other and rotate in the same direction. They together play the role of conveying, friction extrusion and heating.

The material is input by the principle of positive displacement for forced conveying, and little pressure is formed, thus better solving this problem on the single-screw floating fish food machine, and strong conveying.

The floating fish feed making machine integrates various functions such as compression, mixing, kneading, shearing, melting, sterilization, puffing, and molding, and can be completed in a very short time. The transformation of the mold can change the shape and size of the product infinitely.

The twin-screw floating fish food machine can produce a wide variety of food products, such as snack food, breakfast cereal, sandwich puffed food, instant rice flour, soup, bread slices, and textured vegetable protein. , candy, flavoring ingredients, pet food, fish and shrimp feed, etc., and can develop countless new types of food.

The twin-screw floating fish food machine is a large aspect ratio floating fish feed extruder machine independently designed and manufactured by our factory based on the advantages of similar products at home and abroad and our company’s strong equipment advantages. The output is high, the energy consumption is low, and the energy saving efficiency is high.

After the screw of floating fish food machine is lengthened, the adaptability of the material is wide. At the same time, because the material stays in the machine cavity for a long time, it can be matured and mixed properly.

At the same time, the screw speed is correspondingly accelerated, which can improve the quality of the product and achieve the purpose of increasing the output.

Using frequency conversion speed regulation to achieve low-speed start-up and smooth operation.

This kind of floating fish food machine is suitable for all kinds of pet feed, aquatic feed, mink and fox feed, snack food, cereal puffing, abalone feed, etc. The raw materials are widely adapted and belong to the multi-functional large-scale floating fish food machine.

1. Product features of floating fish food machine

  • Efficient first-stage gear transmission to ensure the transfer of energy;
  • All stainless steel feeder for floating fish food machine, variable pitch anti-arching mechanism, adopt imported frequency conversion speed control;
  • Enlarged stainless steel conditioner for floating fish food machine, which adopts axial inlet steam, greatly improves the time and effect of conditioning and curing;
  • The high-precision transmission gear and gear shaft are carburized and quenched, and the hard tooth surface is ground, which has stable transmission, low noise and long service life;
  • The material of the gear box and the high precision of the transmission hole are guaranteed by the casting technology and CNC machining equipment of the professional foundry;
  • The main drive system bearings and oil seals are imported. And a special lubrication oil return system is set up to ensure reliable bearing lubrication;
  • The connection between the floating fish food machine ring die and the drive wheel adopts three-piece quick-release precision casting hoop, which is convenient and quick to disassemble the ring die;
  • The door cover and chute of floating fish food machine are all made of stainless steel, with strong anti-corrosion ability and long service life;
  • The motor and gear shaft adopt a new type of serpentine spring coupling, which is convenient for disassembly and assembly, reliable transmission and high efficiency.
floating fish food machine

2. Pre-sales service for floating fish feed making machine

  • Special design, manufacture and application tests can be carried out according to your needs, and targeted training can be provided.
  • For you to carry out floating fish food machine configuration, floating fish feed mill process design, plant optimization layout.
  • Give you on-site guidance in the floating fish feed mill factory area and conduct on-site demonstrations.
  • As an agent for transportation, send technicians to install and debug, and train personnel.
  • Business personnel provide you with professional consultation on relevant market information, floating fish food machine combination, process technology, raw and auxiliary materials, packaging, etc.
  • One-year equipment warranty, lifetime maintenance, long-term discount, supply of spare parts.

3. After-sales service for floating fish food machine

  • The floating fish food machine is guaranteed for one year and the accessories are provided with discounts all year round.
  • After-sales service personnel promise to come to the factory for maintenance within 24 hours.
  • Provide long-term technical support such as formula technology update.
  • Contact the floating fish food machine customer to help deal with the equipment after the equipment is updated.
  • Provide customers who have near-needed products all year round.

Richi Machinery has been committed to the research and development of floating fish food machine, biomass energy machinery, fertilizer machinery and its complete sets of projects for many years.

It is a professional floating fish food machine manufacturing company integrating product design, manufacturing and complete set of engineering design and installation.

The main stand-alone equipment produced by the company are: crushing, micro-grinding series equipment; batching mixing series equipment; granulation series equipment; floating fish food machine series equipment; cooling, crushing, grading sieve series equipment; Forage granule processing equipment; compound fertilizer processing equipment; cleaning, iron removal, dust removal equipment; lifting, conveying and other general equipment.

The engineering products provided by the company include: small feed processing units; building block feed processing units; large feed processing complete sets; forage processing complete sets; hops processing complete sets; warehousing and transportation complete sets; technical services, including: factory or complete floating fish food machine line planning and design; production problem diagnosis; operation and maintenance training; spare parts supply and maintenance services.

With a team of technical elites who have been engaged in the design, manufacture and installation of floating fish food machine, biomass energy machinery, fertilizer machinery and complete sets of floating fish feed mill projects for many years. 

Richi Machinery adheres to the truth-seeking and pragmatic work style, and adheres to the principle of “vision, conscience, and courage. Innovation, cooperation and win-win” development concept, serve domestic and foreign users with excellent floating fish food machine products and reasonable prices, and create value for customers.

poultry feed pellet making machine

How to maintain poultry feed pellet making machine in daily use?

Ring die poultry feed pellet making machine (also known as ring die granulator, ring die poultry feed pelletizer) belongs to pellet fuel granulation equipment. It is a processing machine that directly presses crushed materials such as straw, soybean meal, straw, peanut husk, rice husk into granules.

Ring die poultry feed pellet making machine is a SZLH series equipment with good production and quality. Due to the complex design and structure of the poultry feed machine and high maintenance requirements, regular maintenance should be performed to ensure the normal operation of the equipment.

poultry feed pellet making machine

1.Notes on daily maintenance:

(1) The residual materials in the poultry feed pellet making machine are often removed to prevent the residual materials from corroding the ring die;

(2) Before operation, the equipment should be filled with lubricating oil to reduce the high temperature of the fuselage caused by equipment friction;

(3) Always check whether the gap between the ring die and the pressing roller is within the normal range;

(4) Regularly check the tightness of the triangle tape and adjust it in time;

(5) The surface of the poultry feed pellet making machine should be clean and hygienic, and insisting on cleaning the fuselage of the poultry feed pellet making machine can prevent the exterior of the fuselage from rotting.

(6) When the device is free of particles. Check whether the material hole is normal. If not, you can drill holes with a hand drill. Pay attention to the water content of the stirring material, and adjust the gap between the inner wall of the ring die and the roller;

(7) The pellet forming rate is low. The reason is that the moisture content of the material is too low, and the moisture content of the powdery material should be increased;

(8) The pellet surface is rough. Pay attention to the refueling materials, stop the cycle extrusion and run-in, and achieve the regular brightness;

(9) The output is too low. If the feeding is not enough, the opening of the feeder gate can be increased. If the gap between the inner wall of the ring die and the roller is too large, the gap can be adjusted to about 0.15mm. If the powder is agglomerated in the ring die, the agglomeration in the ring die sleeve can be removed.

2.Which ring die poultry feed pellet making machine is better?

All kinds of poultry feed machinery and equipment produced by Richi Pellet Machinery are cost-effective, low energy consumption, stable and reliable, easy to operate, mature in system technology, compact in structure, and one-stop service for complete set of feed turnkey projects;

Richi Machinery is fully equipped: poultry pellet machine, feed crusher , mixer, expander, cooler, stabilizer, crusher, ring die accessories, electrical control system, etc.

3.What should be paid attention to when choosing a poultry feed pellet machine?

(1) Look at the poultry feed pellet making machine manufacturer

If it is a large-scale or retail farmer, if conditions permit, you can directly check the strength of the manufacturer by car. Seeing is believing, but hearing is false. It all depends on the real grain effect you see in the test machine.

(2) Look at the evaluation

As long as the packaging manufacturer must have a bad reputation, as farmers, they should know the manufacturer’s reputation in the industry based on the market list information for the first time, and give themselves some reassurance.

(3) Look at the product

The poultry feed processing equipment is not big or small, and it is also one thousand yuan to buy. After purchasing, the first test must be carried out to see whether the overall product granulation effect can meet the satisfactory output standard.

In short, the various poultry feed pellet making machines on the market make farmers do not know how to choose. As a poultry feed machine manufacturer, the author reminds most farmers that it is the best to choose the feed processing that suits them.

4.The method of correct adjustment of poultry feed machine press roller

Ring die is a ring die accessory die equipped with ring die poultry feed pellet making machine. The materials generally used to make ring die are alloy steel, carbon steel and stainless steel. The ring die is an essential accessory of the poultry feed pelletizer, and the use of the ring die will directly affect the service life of the ring die and the quality of the finished pellet feed.

Adjustment of the gap between the ring die and the pressure roller For the adjustment of the gap between the new ring die and the pressure roller, the ring die and the highest point of the pressure roller should be slightly contacted, and the pressure roller should be in a state that does not turn.

If the adjustment is made under the poultry feed pellet making machine working state, the pressure of the ring die and the pressing roller can be appropriately increased, but it must be stopped in moderation.

The gap between the ring die and the pressing roller is too large, and the pressing roller cannot rotate, resulting in blockage of the poultry feed pellet making machine. If the gap between the ring die and the pressure roller is too small, it will increase the wear and tear of the ring die and the pressure roller, increase the load, and cause damage to the ring die and the pressure roller in severe cases.

The gap between the ring die and the pressing roller should be checked in time, at least once every four working hours. When adjusting each pressure roller, pay attention to the adjustment direction of each pressure roller, so that the moment sum of each pressure roller relative to the shaft of the poultry feed pellet making machine is zero, so that the poultry pellet making machine is not affected by asymmetric force.

Correctly install or replace ring die and pressure roller. Generally, the new mold is equipped with a new roller, and the old mold is equipped with an old roller, so that the surface shape of the ring mold and the pressure roller is close to the shape of the profiling state, and the local gap between the ring mold and the pressure roller is roughly the same.

In this way, the stress and discharge of the entire ring die are very uniform, which can improve poultry feed pellet making machine production efficiency.

Team maintenance. Pre-shift inspection should be carried out for each shift, check all transmission components, instruments and valves, add lubricating oil with lithium-based lubricating oil, and remove iron filings from iron tools.

Before assembly, cleaning should be done to ensure that all mating surfaces are clean. Pay special attention to the cleaning of the annular die screw holes. If the material in the ring die screw hole is not clean, it is easy to cause cracking of the ring die bolt hole when tightening the ring die bolt. Tighten the poultry feed pellet making machine ring die bolts with a torque wrench to ensure the specified tightening torque.

When assembling the pressure roller, pay attention to the inspection of the bearing. Once damaged, it should be replaced in time. After the poultry feed pellet making machine rollers are assembled, make sure that there is a certain gap so that the rollers can rotate freely. The pressure rollers must be filled with oil on time every shift.

Once the pressure roller is short of oil, the bearing and the pressure roller shaft will be burned, and the entire pressure roller will be scrapped in serious cases.